Standardization · SIS/TK 273

Skärande verktyg

Svenska verktygstillverkare håller en framskjuten position vad gäller verktygstillverkning, både kvalitetsmässigt och kvantitetsmässigt; svenska företag med internationella dotterbolag tillverkar drygt 1/3 av alla hårdmetallverktyg.

Standardiseringen syftar till att öka utbytbarheten mellan verktyg och maskin samt mellan verktygssystem. Variantbegränsning är en annan faktor som bidrar till att hålla kostnader nere. Verktygens kvalitet garanteras genom standarder för allmänna tekniska data (minimikrav). Internationell och svensk standard för hårdmetallverktyg är en nödvändighet för rationell tillverkning och förenklat handhavande hos användaren.

SIS/TK 273 behandlar standardiseringen av skärande verktyg, t ex vändskär av hårdmetall, keramik etc., fräsar, borrar, gängtappar mm. samt hållare. Stor vikt i arbetet läggs också på att ta fram klassificering av verktygsmaterial.

Ett annat viktigt område är underhållet och vidareutvecklingen av standarden för digitalt utbyte av verktygsdata, ISO 13399-serien.

Kommittén bevakar, deltar i och påverkar det internationella standardiseringsarbetet inom ISO/TC 29 Small tools, ISO/TC 29/SC 9, Tools with cutting edges made of hard cutting materials och ISO/TC 29/WG 34, Cutting tool data representation and exchange.

Påverka nationellt och internationellt

Kommittén skapar ett forum för svenskt agerande i den internationella standardiseringen, genom att vi aktivt medverkar i den internationella standardiseringsorganisationen ISO. På så sätt kan vi driva utvecklingen av standarden och påverka innehållet så att den främjar de svenska intressena.

Arbetet inom kommittén omfattar alla standardiseringsärenden inom ramen för ISO/TC 29 Small tools, ISO/TC 29/SC 2, High speed steel cutting tools and their attachments och ISO/TC 29/SC 9, Tools with cutting edges made of hard cutting materials. Information om ISO/TC 29 hittar du på ISO:s hemsida med följande länk: ISO.

More information about the committèes work:

Published 197 standards

SS-ISO 3002-3:2025
Basic quantities in cutting and grinding — Part 3: Geometric and kinematic quantities in cutting (ISO 3002-3:1984, IDT)

SS-ISO 3002-5:2025
Basic quantities in cutting and grinding — Part 5: Basic terminology for grinding processes using grinding wheels (ISO 3002-5:1989, IDT)

SS-ISO 3002-4:2025
Basic quantities in cutting and grinding — Part 4: Forces, energy, power (ISO 3002-4:1984, IDT)

SS-ISO 3002-1:2025
Basic quantities in cutting and grinding — Part 1: Geometry of the active part of cutting tools — General terms, reference systems, tool and working angles, chip breakers (ISO 3002-1:1982, IDT)

SS-ISO 3002-2:2025
Basic quantities in cutting and grinding — Part 2: Geometry of the active part of cutting tools — General conversion formulae to relate tool and working angles (ISO 3002-2:1982, IDT)

SS-ISO 22402-2:2024
Medium-transfer units for tool interfaces — Part 2: Transfer units for polygonal taper interfaces in accordance with the ISO 26623 series (ISO 22402-2:2022, IDT)

SS-ISO 12164-2:2024
Hollow taper interface with flange contact surface — Part 2: Receivers of types A, C and E for hollow taper shanks of types A, AB, C, CB and EB (ISO 12164-2:2023, IDT)

SS-ISO 12164-6:2024
Hollow taper interface with flange contact surface — Part 6: Receivers of types AS, CS and ES for hollow taper shanks of types AS, CS and ES (ISO 12164-6:2023, IDT)

SS-ISO 12164-5:2024
Hollow taper interface with flange contact surface — Part 5: Shanks of types AS, CS and ES (ISO 12164-5:2023, IDT)

SS-ISO 12164-1:2023
Hollow taper interface with flange contact surface — Part 1: Shanks of types A, AB, C, CB and EB (ISO 12164-1:2023, IDT)

SS-ISO 12164-4:2023
Hollow taper interface with flange contact surface — Part 4: Receivers of types T and U for hollow taper shanks of types T, TA and U (ISO 12164-4:2023, IDT)

SS-ISO 12164-3:2023
Hollow taper interface with flange contact surface — Part 3: Shanks of types T, TA and U (ISO 12164-3:2023, IDT)

SS-ISO 4468:2022
Gear hobs - Accuracy requirements (ISO 4468:2020, IDT)

SIS-ISO/TS 13399-3:2021
Cutting tool data representation and exchange - Part 3: Reference dictionary for tool items (ISO/TS 13399-3:2021, IDT)

SIS-ISO/TS 13399-4:2021
Cutting tool data representation and exchange - Part 4: Reference dictionary for adaptive items (ISO/TS 13399-4:2021, IDT)

SIS-ISO/TS 13399-2:2021
Cutting tool data representation and exchange - Part 2: Reference dictionary for cutting items (ISO/TS 13399-2:2021, IDT)

SS-ISO 2586:2021
Shell end mills with plain bore and tenon drive - Metric series (ISO 2586:1985, IDT)

SS-ISO 2402:2021
Shell reamers with taper bore (taper bore 1 : 30 (included)) with slot drive and arbors for shell reamers (ISO 2402:1972, IDT)

SS-ISO 2587:2021
Side and face milling cutters with plain bore and key drive - Metric series (ISO 2587:1972, IDT)

SS-ISO 3465:2021
Hand taper pin reamers (ISO 3465:1975, IDT)

SS-ISO 2585:2021
Slotting cutters with plain bore and key drive - Metric series (ISO 2585:1972, IDT)

SS-ISO 10889-6:2021
Tool holders with cylindrical shank - Part 6: Type E with cylindrical seat (ISO 10889-6:2016, IDT)

SS-ISO 10889-3:2021
Tool holders with cylindrical shank - Part 3: Type B with rectangular radial seat (ISO 10889-3:2016, IDT)

SS-ISO 10889-5:2021
Tool holders with cylindrical shank - Part 5: Type D with more than one rectangular seat (ISO 10889-5:2016, IDT)

SS-ISO 10145-2:2021
End mills with brazed helical hardmetal tips - Part 2: Dimensions of end mills with 7/24 taper shank (ISO 10145-2:2016, IDT)

SS-ISO 10889-7:2021
Tool holders with cylindrical shank - Part 7: Type F with taper seat (ISO 10889-7:2016, IDT)

SS-ISO 10889-4:2021
Tool holders with cylindrical shank - Part 4: Type C with rectangular axial seat (ISO 10889-4:2016, IDT)

SS-ISO 10889-2:2021
Tool holders with cylindrical shank - Part 2: Type A, shanks for tool holders of special designs (ISO 10889-2:2016, IDT)

SS-ISO 26623-1:2020
Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks (ISO 26623-1:2020, IDT)

SS-ISO 521:2020
Machine chucking reamers with cylindrical shanks and Morse taper shanks (ISO 521:2011, IDT)

SS-ISO 11054:2020
Cutting tools - Designation of high-speed steel groups (ISO 11054:2006, IDT)

SS-ISO 4875-1:2020
Metal cutting band saw blades - Part 1: Vocabulary (Bilingual edition) (ISO 4875-1:2006, IDT)

SS-ISO 4875-2:2020
Metal cutting band saw blades - Part 2: Characteristics and dimensions (ISO 4875-2:2006, IDT)

SS-ISO 866:2020
Centre drills for centre holes without protecting chamfers - Type A (ISO 866:2016, IDT)

SS-ISO 22180:2019
CVD diamond tools - Categorization (ISO 22180:2019, IDT)

SS-ISO 2296:2018
Metal slitting saws with fine and coarse teeth - Metric series (ISO 2296:2018, IDT)

SS-ISO 2238:2018
Machine bridge reamers (ISO 2238:2018, IDT)

SS-ISO 2780:2018
Milling cutters with tenon drive - Interchangeability dimensions for cutter arbors - Metric series (ISO 2780:2018, IDT)

SS-ISO 3438:2018
Subland twist drills for holes prior to tapping screw threads (ISO 3438:2013, IDT)

SS-ISO 2490:2018
Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module - Nominal dimensions (ISO 2490:2007, IDT)

SS-ISO 16084:2017
Balancing of rotating tools and tool systems (ISO 16084:2017, IDT)

SS-ISO 2541:2017
Centre drills for centre holes with radius form - Type R (ISO 2541:2016, IDT)

SS-ISO 2540:2017
Centre drills for centre holes with protecting chamfer - Type B (ISO 2540:2016, IDT)

SS-ISO 4205:2017
Countersinks, 90°, with parallel shanks and solid pilots (ISO 4205:2016, IDT)

SS-ISO 12197:2017
Woodruff keyseat cutters - Dimensions (ISO 12197:2016, IDT)

SS-ISO 4207:2017
Counterbores with Morse taper shanks and detachable pilots (ISO 4207:2016, IDT)

SS-ISO 4202:2017
Reduction sleeves with external 7/24 taper for tools with Morse taper shanks (ISO 4202:2016, IDT)

SS-ISO 2584:2017
Cylindrical cutters with plain bore and key drive - Metric series (ISO 2584:2016, IDT)

SS-ISO 4206:2017
Counterbores with parallel shanks and solid pilots (ISO 4206:2016, IDT)

SS-ISO 4204:2017
Countersinks, 90°, with Morse taper shanks and detachable pilots (ISO 4204:2016, IDT)

SS-ISO 529:2017
Short machine taps and hand taps (ISO 529:2017, IDT)

SS-ISO 10911:2017
Solid hardmetal end mills with cylindrical shank - Dimensions (ISO 10911:2017, IDT)

SS-ISO 7079:2017
Core drills with parallel shanks and with Morse taper shanks (ISO 7079:2016, IDT)

SS-ISO 3364:2017
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole - Dimensions (ISO 3364:2017, IDT)

SS-ISO 3292:2017
Extra-long parallel shank twist drills (ISO 3292:2016, IDT)

SS-ISO 235:2017
Parallel shank jobber and stub series drills and Morse taper shank drills (ISO 235:2016, IDT)

SS-ISO 238:2017
Reduction sleeves and extension sockets for tools with Morse taper shanks (ISO 238:2016, IDT)

SIS-ISO/TS 13399-80:2017
Cutting tool data representation and exchange - Part 80: Creation and exchange of 3D models - Overview and principles

SS-ISO 10898:2017
Spot drills (ISO 10898:2016, IDT)

SS-ISO 1832:2017
Indexable inserts for cutting tools - Designation (ISO 1832:2017, IDT)

SS-ISO 2284:2017
Hand taps for parallel and taper pipe threads - General dimensions and marking (ISO 2284:2017, IDT)

SS-ISO 26622-1:2017
Modular taper interface with ball track system - Part 1: Dimensions and designation of shanks (ISO 26622-1:2017, IDT)

SS-ISO 494:2017
Cylindrical shank twist drills - Long series (ISO 494:2017, IDT)

SS-ISO 5468:2017
Rotary and rotary impact masonry drill bits with hardmetal tips - Dimensions (ISO 5468:2017, IDT)

SS-ISO 2250:2017
Finishing reamers for Morse and metric tapers, with cylindrical shanks and Morse taper shanks (ISO 2250:2017, IDT)

SS-EN ISO 4231:2017
Hand- and machine-operated circular screwing dies for parallel pipe threads - G series (ISO 4231:2016)

SS-EN ISO 4230:2017
Hand- and machine-operated circular screwing dies for taper pipe threads - R series (ISO 4230:2016)

SS-ISO 8051:2016
Long shank taps with nominal diameters from M3 to M10 - Full-diameter shank taps with recess (ISO 8051:2016, IDT)

SS-ISO 10897:2016
Collets for tool holders with taper ratio 1:10 - Collets, holders, nuts (ISO 10897:2016, IDT)

SIS-ISO/TS 13399-70:2016
Cutting tool data representation and exchange - Part 70: Graphical data layout - Layer setting for tool layout

SIS-ISO/TS 13399-72:2016
Cutting tool data representation and exchange - Part 72: Creation of documents for the standardized data exchange - Definition of properties for drawing header and their XML-data exchange (ISO/TS 13399-722016, IDT)

SIS-ISO/TS 13399-71:2016
Cutting tool data representation and exchange - Part 71: Graphical data layout - Creation of documents for the standardized data exchange: Graphical product information (ISO/TS 13399-71:2016, IDT)

SS-ISO 240:2016
Milling cutters - Interchangeability dimensions for cutter arbors or cutter mandrels (ISO 240:2016, IDT)

SS-ISO 3294:2016
Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive (ISO 3294:2016, IDT)

SS-ISO 3293:2016
Morse taper shank countersinks for angles 60 degrees, 90 degrees and 120 degrees inclusive (ISO 3293:2016, IDT)

SS-ISO 1641-1:2016
End mills and slot drills - Part 1: Milling cutters with cylindrical shanks (ISO 1641-1:2016, IDT)

SS-ISO 3466:2016
Machine taper pin reamers with parallel shanks (ISO 3466:2016, IDT)

SS-ISO 7388-3:2016
Tool shanks with 7/24 taper for automatic tool changers - Part 3: Retention knobs of forms AD, AF, UD, UF, JD and JF (ISO 7388-3:2016, IDT)

SS-ISO 3286:2016
Single point cutting tools - Corner radii (ISO 3286:2016, IDT)

SS-ISO 3365:2016
Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole - Dimensions (ISO 3365:2016, IDT)

SS-ISO 3467:2016
Machine taper pin reamers with Morse taper shanks (ISO 3467:2016, IDT)

SS-ISO 10145-1:2016
End mills with brazed helical hardmetal tips - Part 1: Dimensions of end mills with parallel shank (ISO 10145-1:2016, IDT)

SS-ISO 5611-11:2015
Cartridges, type A, for indexable inserts - Part 11: Style W (ISO 5611-11:2015, IDT)

SS-ISO 5611-12:2015
Cartridges, type A, for indexable inserts - Part 12: Style Y (ISO 5611-12:2015, IDT)

SS-ISO 5611-10:2015
Cartridges, type A, for indexable inserts - Part 10: Style U (ISO 5611-10:2015, IDT)

SS-ISO 5611-1:2015
Cartridges, type A, for indexable inserts - Part 1: General survey, correlation and determination of dimensions (ISO 5611-1:2015, IDT)

SS-ISO 5611-3:2015
Cartridges, type A, for indexable inserts - Part 3: Style G (ISO 5611-3:2015, IDT)

SS-ISO 5611-4:2015
Cartridges, type A, for indexable inserts - Part 4: Style J (ISO 5611-4:2015, IDT)

SS-ISO 5611-7:2015
Cartridges, type A, for indexable inserts - Part 7: Style R (ISO 5611-7:2015, IDT)

SS-ISO 5611-6:2015
Cartridges, type A, for indexable inserts - Part 6: Style L (ISO 5611-6:2015, IDT)

SS-ISO 5611-9:2015
Cartridges, type A, for indexable inserts - Part 9: Style T (ISO 5611-9:2015, IDT)

SS-ISO 5611-8:2015
Cartridges, type A, for indexable inserts - Part 8: Style S (ISO 5611-8:2015, IDT)

SS-ISO 5611-2:2015
Cartridges, type A, for indexable inserts - Part 2: Style F (ISO 5611-2:2015, IDT)

SS-ISO 5611-5:2015
Cartridges, type A, for indexable inserts - Part 5: Style K (ISO 5611-5:2015, IDT)

SS-ISO 10649-4:2015
Cutter arbors with parallel key and tenon drive - Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changer (ISO 10649-4:2013, IDT)

SS-ISO 10649-3:2015
Cutter arbors with parallel key and tenon drive - Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer (ISO 10649-3:2013, IDT)

SS-ISO 10649-2:2015
Cutter arbors with parallel key and tenon drive - Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface (ISO 10649-2:2013, IDT)

SS-ISO 839-2:2015
Milling machine arbors with 7/24 tapers - Part 2: Acessories (ISO 839-2:1977, IDT)

SS-ISO 839-1:2015
Milling machine arbors with 7/24 tapers - Part 1: Dimensions and designation (ISO 839-1:2006, IDT)

SS-ISO 3936:2015
Reduction sleeves with tenon drive with external and internal 7/24 taper - Dimensions (ISO 3936:1993, IDT)

SS-ISO 9361-1:2014
Indexable inserts for cutting tools - Ceramic inserts with rounded corners - Part 1: Dimensions of inserts without fixing hole (ISO 9361-1:2014, IDT)

SS-ISO 9361-2:2014
Indexable inserts for cutting tools - Ceramic inserts with rounded corners - Part 2: Dimensions of inserts with cylindrical fixing hole (ISO 9361-2:2011, IDT)

SS-ISO 5610-9:2014
Tool holders with rectangular shank for indexable inserts - Part 9: Style L (ISO 5610-9:2014, IDT)

SS-ISO 5610-8:2014
Tool holders with rectangular shank for indexable inserts - Part 8: Style K (ISO 5610-8:2014, IDT)

SS-ISO 5610-7:2014
Tool holders with rectangular shank for indexable inserts - Part 7: Style J (ISO 5610-7:2014, IDT)

SS-ISO 5610-6:2014
Tool holders with rectangular shank for indexable inserts - Part 6: Style G (ISO 5610-6:2014, IDT)

SS-ISO 5610-5:2014
Tool holders with rectangular shank for indexable inserts - Part 5: Style F (ISO 5610-5:2014, IDT)

SS-ISO 5610-4:2014
Tool holders with rectangular shank for indexable inserts - Part 4: Style D (ISO 5610-4:2014, IDT)

SS-ISO 5610-3:2014
Tool holders with rectangular shank for indexable inserts - Part 3: Style B (ISO 5610-3:2014, IDT)

SS-ISO 5610-2:2014
Tool holders with rectangular shank for indexable inserts - Part 2: Style A (ISO 5610-2:2014, IDT)

SS-ISO 5610-15:2014
Tool holders with rectangular shank for indexable inserts - Part 15: Style V (ISO 5610-15:2014, IDT)

SS-ISO 5610-14:2014
Tool holders with rectangular shank for indexable inserts - Part 14: Style H (ISO 5610-14:2014, IDT)

SS-ISO 5610-13:2014
Tool holders with rectangular shank for indexable inserts - Part 13: Style T (ISO 5610-13:2014, IDT)

SS-ISO 5610-12:2014
Tool holders with rectangular shank for indexable inserts - Part 12: Style S (ISO 5610-12:2014, IDT)

SS-ISO 5610-11:2014
Tool holders with rectangular shank for indexable inserts - Part 11: Style R (ISO 5610-11:2014, IDT)

SS-ISO 5610-10:2014
Tool holders with rectangular shank for indexable inserts - Part 10: Style N (ISO 5610-10:2014, IDT)

SS-ISO 5610-1:2014
Tool holders with rectangular shank for indexable inserts - Part 1: General survey, correlation and determination of dimensions (ISO 5610-1:2014, IDT)

SS-ISO 514:2014
Turning tools with carbide tips - Internal tools (ISO 514:2014, IDT)

SS-ISO 243:2014
Turning tools with carbide tips - External tools (ISO 243:2014, IDT)

SS-ISO 16463:2014
Polycristalline diamond inserts, tipped - Dimensions, types (ISO 16463:2014, IDT)

SS-ISO 16462:2014
Cubic boron nitride inserts, tipped or solid - Dimensions, types (ISO 16462:2014, IDT)

SIS-ISO/TS 13399-100:2008/Cor1:2014
Cutting tool data representation and exchange - Part 100: Definitions, principles and methods for reference dictionaries - Technical Corrigendum 1 (ISO/TS 13399-100:2008/Cor 1:2011, IDT)

SS-ISO 26623-2:2014
Polygonal taper interface with flange contact surface - Part 2: Dimensions and designation of receivers (ISO 26623-2:2014, IDT)

SIS-ISO/TS 13399-60:2014
Cutting tool data representation and exchange - Part 60: Reference dictionary for connection systems (ISO/TS 13399-60:2014, IDT)

SIS-ISO/TS 13399-5:2014
Cutting tool data representation and exchange - Part 5: Reference dictionary for assembly items (ISO/TS 13399-5:2014, IDT)

SIS-ISO/TS 13399-50:2013
Cutting tool data representation and exchange - Part 50: Reference dictionary for reference systems and common concepts (ISO/TS 13399-50:2013, IDT)

SS-ISO 6262-1:2013
End mills with indexable inserts - Part 1: End mills with flatted parallel shank (ISO 6262-1:2013, IDT)

SS-ISO 513:2013
Classification and application of hard cutting materials for metal removal with defined cutting edges - Designation of the main groups and groups of application (ISO 513:2012, IDT)

SS-ISO 6262-2:2013
End mills with indexable inserts - Part 2: End mills with Morse taper shank (ISO 6262-2:2013, IDT)

SS-ISO 10649-1:2013
Cutter arbors with parallel key and tenon drive - Part 1: General dimensions (ISO 10649-1:2013, IDT)

SS-ISO 6986:2013
Side and face milling (slotting) cutters with indexable inserts - Dimensions (ISO 6986:2013, IDT)

SS-ISO 883:2013
Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole - Dimensions (ISO 883:2013, IDT)

SS-ISO 7755-11:2013
Hardmetal burrs - Part 11: Conical pointed-nose burrs (style M) (ISO 7755-11:2013, IDT)

SS-ISO 7755-7:2013
Hardmetal burrs - Part 7: Arch pointed-nose burrs (style G) (ISO 7755-7:2013, IDT)

SS-ISO 7755-3:2013
Hardmetal burrs - Part 3: Cylindrical round- (ball-) nose burrs (style C) (ISO 7755-3:2013, IDT)

SS-ISO 7755-1:2013
Hardmetal burrs - Part 1 : General specifications (ISO 7755-1:2013, IDT)

SS-ISO 3338-2:2013
Cylindrical shanks for milling cutters - Part 2: Dimensional characteristics of flatted cylindrical shanks (ISO 3338-2:2013, IDT)

SS-ISO 7755-4:2013
Hardmetal burrs - Part 4: Spherical burrs (style D) (ISO 7755-4:2013, IDT)

SS-ISO 7755-10:2013
Hardmetal burrs - Part 10: Conical round- (ball-) nose burrs (style L) (ISO 7755-10:2013, IDT)

SS-ISO 7755-9:2013
Hardmetal burrs - Part 9: 60 degrees and 90 degrees cone burrs (styles J and K) (ISO 7755-9:2013, IDT)

SS-ISO 7755-6:2013
Hardmetal burrs - Part 6: Arch round- (ball-) nose burrs (style F) (ISO 7755-6:2013, IDT)

SS-ISO 7755-2:2013
Hardmetal burrs - Part 2: Cylindrical burrs (style A) (ISO 7755-2:2013, IDT)

SS-ISO 7755-12:2013
Hardmetal burrs - Part 12: Inverted cone burrs (style N) (ISO 7755-12:2013, IDT)

SS-ISO 7755-8:2013
Hardmetal burrs - Part 8: Flame burrs (style H) (ISO 7755-8:2013, IDT)

SS-ISO 7755-5:2013
Hardmetal burrs - Part 5: Oval burrs (style E) (ISO 7755-5:2013, IDT)

SS-ISO 10649-5:2013
Cutter arbors with parallel key and tenon drive - Part 5: Dimensions and designation of tool holders with polygonal interface with flange contact surface (ISO 10649-5:2012, IDT)

SS-ISO 5609-5:2013
Tool holders for internal turning with cylindrical shank for indexable inserts - Part 5: Style U (ISO 5609-5:2012, IDT)

SS-ISO 5609-1:2013
Tool holders for internal turning with cylindrical shank for indexable inserts - Part 1: Designation, styles, dimensions and calculation for corrections (ISO 5609-1:2012, IDT)

SS-ISO 5609-6:2013
Tool holders for internal turning with cylindrical shank for indexable inserts - Part 6: Style Q (ISO 5609-6:2012, IDT)

SS-ISO 10649-6:2013
Cutter arbors with parallel key and tenon drive - Part 6: Dimensions and designation of tool holders with modular taper interface with ball track system (ISO 10649-6:2012, IDT)

SS-ISO 5609-3:2013
Tool holders for internal turning with cylindrical shank for indexable inserts - Part 3: Style K (ISO 5609-3:2012, IDT)

SS-ISO 236-2:2013
Reamers - Part 2: Long fluted machine reamers with Morse taper shanks (ISO 236-2:2013, IDT)

SS-ISO 5609-4:2013
Tool holders for internal turning with cylindrical shank for indexable inserts - Part 4: Style L (ISO 5609-4:2012, IDT)

SS-ISO 5609-2:2013
Tool holders for internal turning with cylindrical shank for indexable inserts - Part 2: Style F (ISO 5609-2:2012, IDT)

SS-ISO 15917:2013
Solid ball-nosed end mills with cylindrical shanks, made of carbide and ceramic materials (ISO 15917:2012, IDT)

SS-ISO 11529:2013
Milling cutters - Designation - Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges (ISO 11529:2013, IDT)

SS-ISO 6987:2012
Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole - Dimensions (ISO 6987:2012, IDT)

SS-ISO 5608:2012
Turning and copying tool holders and cartridges for indexable inserts - Designation (ISO 5608:2012, IDT)

SS-ISO 9766:2012
Drills with indexable inserts - Cylindrical shanks with a parallel flat (ISO 9766:2012, IDT)

SS-ISO 6462:2011
Face and shoulder milling cutters with indexable inserts - Dimensions (ISO 6462:2011, IDT)

SS-ISO 1641-2:2011
End mills and slot drills - Part 2: Dimensions and designation of milling cutters with Morse taper shanks (ISO 1641-2:2011, IDT)

SS-ISO 1641-3:2011
End mills and slot drills - Part 3: Dimensions and designation of milling cutters with 7/24 taper shanks (ISO 1641-3:2011, IDT)

SS-ISO 3860:2011
Bore cutters with key drive - Form milling cutters with constant profile (ISO 3860:2011, IDT)

SS-ISO 13399-1:2007/Cor 2:2011
Cutting tool data representation and exchange - Part 1: Overview, fundamental principles and general information model (ISO 13399-1:2006/Cor 2:2011, IDT)

SS-ISO 9270-1:2010
7/24 taper spindle noses for automatic tool changers - Part 1: Dimensions and designation of spindle noses of forms S and SF (ISO 9270-1:2010, IDT)

SS-ISO 9270-2:2010
7/24 taper spindle noses for automatic tool changers - Part 2: Dimensions and designation of spindle noses of forms J and JF (ISO 9270-2:2010, IDT)

SS-ISO 13399-1:2007/Amd 1:2010
Cutting tool data representation and exchange - Part 1: Overview, fundamental principles and general information model (ISO 13399-1:2006/Amd 1:2010, IDT)

SS-ISO 10643:2009
Dimensions of accessories for cutter arbors with parallel key and tenon drive (ISO 10643:2009, IDT)

SIS-ISO/TS 13399-100:2009
Cutting tool data representation and exchange - Part 100: Definitions, principles and methods for reference dictionaries

SIS-ISO/TS 13399-150:2008
Cutting tool data representation and exchange - Part 150 : Usage guidelines (ISO/TS 13399-150:2008, IDT)

SS-ISO 3937-3:2008
Cutter arbors with tenon drive - Part 3: Dimensions of hollow taper interface with flange contact surface (ISO 3937-3:2008, IDT)

SS-ISO 3937-2:2008
Cutter arbors with tenon drive - Part 2: Dimensions of 7/24 taper (ISO 3937-2:2008, IDT)

SS-ISO 3937-1:2008
Cutter arbors with tenon drive - Part 1: Dimensions of Morse taper (ISO 3937-1:2008, IDT)

SS-ISO 26622-2:2008
Modular taper interface with ball track system - Part 2: Dimensions and designation of receivers (ISO 26622-2:2008, IDT)

SS-ISO 13399-1:2007/Cor 1:2008
Cutting tool data representation and exchange - Part 1: Overview, fundamental principles and general information model (ISO 13399-1:2006/Cor 1:2008, IDT)

SS-ISO 5415:2008
Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw (ISO 5415:2007, IDT)

SS-ISO 7388-2:2007
Tool shanks with 7/24 taper for automatic tool changers - Part 2: Dimensions and designation of shanks of forms J, JD and JF (ISO 7388-2:2007, IDT)

SS-ISO 7388-1:2007
Tool shanks with 7/24 taper for automatic tool changers - Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF (ISO 7388-1:2007, IDT)

SS-ISO 22037:2007
Solid end mills with corner radii and cylindrical shanks made of hard cutting materials - Dimensions (ISO 22037:2007, IDT)

SS-ISO 2336-2:2007
Hacksaw blades - Part 2: Dimensions for machine blades (ISO 2336-2:2006, IDT)

SS-ISO 13399-1:2007
Cutting tool data representation and exchange - Part 1: Overview, fundamental principles and general information model (ISO 13399-1:2006, IDT)

SS-ISO 5414-1:2006
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Part 1: Dimensions of the driving system of tool shanks (ISO 5414-1:2002, IDT)

SS-ISO 15488:2006
Collets with 8 degrees setting angle for tool shanks - Collets, nuts and fitting dimensions (ISO 15488:2003, IDT)

SS-ISO 5414-2:2006
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools - Part 2: Connecting dimensions of chucks and designation (ISO 5414-2:2002, IDT)

SS-ISO 10889-1:2004
Tool holders with cylindrical shank - Part 1: Cylindrical shank, location bore - Technical delivery conditions (ISO 10889-1:2004, IDT)

SS-ISO 10889-8
Tool holders with cylindrical shank - Part 8: Type Z, accessories

SS-ISO 3338-3
Cylindrical shanks for milling cutters - Part 3: Dimensional characteristics of threaded shanks

SS-ISO 2336-1
Hacksaw blades - Part 1: Dimensions for hand blades

SS 1981
Morse taper tapped shanks with driving flats on collar

SS 3435
Milling cutters - Inverse dovetail cutters with flatted parallel shank

SS 900
Milling cutters - Nomenclature

SS 1135
Reamers - Terminology

SMS 580
Special tolerances for reamers

SMS 595
Rotating tools. Diameters of shanks and sizes of driving squares

SMS 821
Centre drills for centre holes with protecting chamfer 90 degrees. Type C

SMS 885
Twist drills. Nomenclature

SMS 714
Draw plates with carbide core and circular hole

Show more Show less

Participants 2 companies and organizations

AB Sandvik Coromant, Sandviken

Seco Tools AB, Fagersta

International participation 4 international committees

ISO/TC 29, Small tools

ISO/TC 29/MA, ISO 13399 Maintenance Agency

ISO/TC 29/SC 9, Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO/TC 29/WG 34, Cutting tool data representation and exchange

Show more Show less

Financing

Arbetet styrs och finansieras av de organisationer som deltar i kommittén. Projektavgiften beror på arbetsform och omfattning, samt antal deltagare.

Delta i kommittén

Ett värdefullt arbete

I kommittén samlas expertkunskap genom representanter från tillverkare, användare, intresseorganisationer, myndigheter eller övriga i branschen. Standardiseringsarbetet ger deltagarna djupare insikt om standardernas krav och hur man resonerar kring dessa, vilket underlättar vid diskussion med olika parter inom branschen. Deltagarna är samtidigt med och påverkar framtidens standarder, vilket också leder till nya insikter och tidig information som kan omsättas i den egna verksamhetsutvecklingen. Framöver fokuserar kommittén bland annat på tillåten obalans i verktygshållarsystem.

Vill du vara med i kommittén?

Du är välkommen att delta i SIS tekniska kommitté för skärande verktyg. Kanske du idag jobbar som tillverkare, leverantör, konstruktör, på myndighet eller organisation, eller så är du användare med åsikter om säkerhet, användarvänlighet eller någon annan fråga. Om du är intresserad av att delta, kan du kontakta oss så berättar vi mer om arbetet.

Subjects

Manufacturing engineering (25) Machine tool systems (25.060) Machine tools (25.080) Cutting tools (25.100)

För dig som är kommittédeltagare

För ett effektivt och meningsfullt deltagande i våra tekniska kommittéer erbjuder vi utbildningar i standardutveckling. För deltagare i tekniska kommittér är grundkursen kostnadsfri.
Läs mer

Contact

If you have questions or want to know more about the SIS standardization activities? Please contact us.

Anna-Carin Näreskog
Project manager
anna-carin.nareskog@sis.se

Ulrika Axmark
Project coordinator
ulrika.axmark@sis.se

Muzaffar Ahmad
Chairman
AB Sandvik Coromant