Standardization · SIS/TK 110

Akustik och buller

Vi utsätts dagligen för ljud och buller, både det vi upplever som störande eller angenämt men även ljud som vi inte märker att vi påverkas av. Kommittén för akustik och buller arbetar med standardisering för att kunna mäta, bedöma och jämföra ljudnivåer och ljudreducerande åtgärder för att kunna sänka ljudnivåerna i samhället.

Kommittén för akustik och buller är med och aktivt påverkar innehåll och riktlinjer för framtida standarder, både globalt, inom Europa och nationellt. Målet för arbetet är att ta fram internationellt samordnade standarder för att bidra till en bättre ljudmiljö. Detta görs genom att erbjuda de verktyg som behövs för att på ett standardiserat sätt kunna mäta, bedöma, beräkna och jämföra ljudnivåer samt effekten av ljudreducerande åtgärder. Kommittén arbetar bland annat med standarder för mätning av buller från trafik och skjutbanor och med bestämning av bullerexponering i tätbebyggda områden samt med ljudlandskap som utgår från hur ljud från olika ljudkällor upplevs. Kommittén arbetar även med grundstandarder för mätning av buller från maskiner.

Kommittén arbetar inte med byggnadsakustiska frågor. Dessa behandlas av SIS/TK 197 Byggnadsakustik.

Det internationella arbetet inom området startade 1948 och motsvarande arbete i Sverige kom igång under 1950-talet. Ett genombrott kom 1957 då man på global nivå kom överens om de tre frekvenskurvorna A, B och C för vägning av hörbart ljud. Detta gjorde det möjligt att standardisera bullermätare och därigenom enkelt kunna jämföra uppmätta bullernivåer i hela världen.

More information about the committèes work:

News

2021-12-10
Standard för bättre ljudkvalitet i öppna kontorslandskap

Published 133 standards

SIS-ISO/TS 20065:2025
Acoustics — Objective method for assessing the audibility of tones in noise — Engineering method (ISO/TS 20065:2022, IDT)

SS-EN ISO 17201-4:2025
Acoustics — Noise from shooting ranges — Part 4: Prediction of projectile sound (ISO 17201-4:2025, IDT)

SS-EN ISO 17201-2:2025
Acoustics — Noise from shooting ranges — Part 2: Calculation of muzzle blast (ISO 17201-2:2024, IDT)

SS-EN ISO 9612:2025
Acoustics — Determination of occupational noise exposure — Methodology (ISO 9612:2025, IDT)

SS-ISO 13472-2:2025
Acoustics — Measurement of sound absorption properties of road surfaces in situ — Part 2: Spot method for reflective surfaces (ISO 13472-2:2024, IDT)

SS-ISO 16254:2024
Acoustics — Measurement of sound emitted by road vehicles of category M and N at standstill and low speed operation — Engineering method (ISO 16254:2024, IDT)

SS-EN ISO 5114-1:2024
Acoustics - Determination of uncertainties associated with sound emission measures - Part 1: Sound power levels determined from sound pressure measurements (ISO 5114-1:2024)

SS-EN ISO 26101-2:2024
Acoustics - Test methods for the qualification of the acoustic environment - Part 2: Determination of the environmental correction (ISO 26101-2:2024, IDT)

SS-EN ISO 21388-2:2024
Acoustics — Hearing Aid Fitting Management — Part 2: Tele-services as part of hearing aid fitting management (tHAFM) (ISO 21388-2:2024, IDT)

SS-EN ISO 7029:2017/A1:2024
Acoustics — Statistical distribution of hearing thresholds related to age and gender — Amendment 1: Correction of parameter values for estimating the hearing threshold distribution (ISO 7029:2017/Amd 1:2024, IDT)

SS-ISO 10302-1:2024
Acoustics — Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices — Part 1: Airborne noise measurement (ISO 10302-1:2024, IDT)

SS-EN ISO 20270:2022
Acoustics - Characterization of sources of structure-borne sound and vibration - Indirect measurement of blocked forces (ISO 20270:2019)

SS-EN ISO 17201-6:2022
Acoustics - Noise from shooting ranges - Part 6: Sound pressure measurements close to the source for determining exposure to sound (ISO 17201-6:2021)

SS-EN ISO 26101-1:2022
Acoustics - Test methods for the qualification of the acoustic environment - Part 1: Qualification of free-field environments (ISO 26101-1:2021)

SIS-CEN ISO/TS 7849-1:2022
Acoustics - Determination of airborne sound power levels emitted by machinery using vibration measurement - Part 1: Survey method using a fixed radiation factor (ISO/TS 7849-1:2009)

SIS-CEN ISO/TS 7849-2:2022
Acoustics - Determination of airborne sound power levels emitted by machinery using vibration measurement - Part 2: Engineering method including determination of the adequate radiation factor (ISO/TS 7849-2:2009)

SS-EN ISO 8253-3:2022
Acoustics - Audiometric test methods - Part 3: Speech audiometry (ISO 8253-3:2022)

SS-ISO 13472-1:2022
Acoustics - Measurement of sound absorption properties of road surfaces in situ - Part 1: Extended surface method (ISO 13472-1:2022, IDT)

SS-ISO 10844:2021
Acoustics - Specification of test tracks for measuring noise emitted by road vehicles and their tyres (ISO 10844:2021, IDT)

SIS-ISO/TS 11819-3:2021
Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 3: Reference tyres (ISO/TS 11819-3:2021)

SS-EN ISO 21388:2021
Acoustics - Hearing aid fitting management (HAFM) (ISO 21388:2020)

SS-EN ISO 11202:2010/A1:2021
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections - Amendment 1 (ISO 11202:2010/Amd 1:2020)

SS-ISO 22955:2021
Acoustics — Acoustic quality of open office spaces (ISO 22955:2021, IDT)

SS-ISO 8297/Amd 1:2021
Acoustics - Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment - Engineering method - Amendment 1 (ISO 8297:1994/Amd 1:2021, IDT)

SS-EN ISO 11904-2:2021
Acoustics - Determination of sound immission from sound sources placed close to the ear - Part 2: Technique using a manikin (ISO 11904-2:2021)

SS-EN ISO 2922:2020
Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours (ISO 2922:2020)

SS-EN ISO 6926:2016/A1:2020
Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels - Amendment 1 (ISO 6926:2016/Amd 1:2020)

SS-EN ISO 11691:2020
Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:2020)

SS-EN ISO 11690-2:2020
Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 2: Noise control measures (ISO 11690-2:2020)

SS-EN ISO 11690-1:2020
Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 1: Noise control strategies (ISO 11690-1:2020)

SS-EN ISO 5135:2020
Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation test room (ISO 5135:2020)

SS-EN ISO 11203:2009/A1:2020
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level - Amendment 1 (ISO 11203:1995/Amd 1:2020)

SS-EN ISO 11200:2014/A1:2020
Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions - Amendment 1 (ISO 11200:2014/Amd 1:2018)

SS-EN ISO 389-7:2019
Acoustics - Reference zero for the calibration of audiometric equipment - Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions (ISO 389-7:2019)

SS-ISO 20270:2019
Acoustics - Characterization of sources of structure-borne sound and vibration - Indirect measurement of blocked forces (ISO 20270:2019, IDT)

SS-EN ISO 3743-2:2019
Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:2018)

SS-ISO 5130:2019
Acoustics - Measurements of sound pressure level emitted by stationary road vehicles (ISO 5130:2019, IDT)

SS-EN ISO 3740:2019
Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards (ISO 3740:2019)

SS-EN ISO 17201-3:2019
Acoustics - Noise from shooting ranges - Part 3: Sound propagation calculations (ISO 17201-3:2019)

SS-EN ISO 17201-1:2019
Acoustics - Noise from shooting ranges - Part 1: Determination of muzzle blast by measurement (ISO 17201-1:2018)

SS-EN ISO 7779:2018
Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment (ISO 7779:2018)

SS-EN ISO 4869-1:2018
Acoustics - Hearing protectors - Part 1: Subjective method for the measurement of sound attenuation (ISO 4869-1:2018)

SS-EN ISO 4869-2:2018
Acoustics - Hearing protectors - Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn (ISO 4869-2:2018)

SS-EN ISO 389-1:2018
Acoustics - Reference zero for the calibration of audiometric equipment - Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones (ISO 389-1:2017)

SS-EN ISO 3745:2012/A1:2017
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms - Amendment 1 (ISO 3745:2012/Amd 1:2017)

SS-EN ISO 7029:2017
Acoustics - Statistical distribution of hearing thresholds related to age and gender (ISO 7029:2017)

SS-EN ISO 389-3:2016
Acoustics - Reference zero for the calibration of audiometric equipment - Part 3: Reference equivalent threshold vibratory force levels for pure tones and bone vibrators (ISO 389-3:2016)

SS-EN ISO 6926:2016
Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2016)

SS-ISO 17534-1:2015
Acoustics - Software for the calculation of sound outdoors - Part 1: Quality requirements and quality assurance (ISO 17534-1:2015, IDT)

SIS-ISO/TR 17534-3:2015
Acoustics - Software for the calculation of sound outdoors - Part 3: Recommendations for quality assured implementation of ISO 9613-2 in software according to ISO 17534-1 (ISO/TR 17534-3:2015, IDT)

SS-EN ISO 1683:2015
Acoustics - Preferred reference values for acoustical and vibratory levels (ISO 1683:2015)

SS-EN ISO 9295:2015
Acoustics - Determination of high-frequency sound power levels emitted by machinery and equipment (ISO 9295:2015)

SS-ISO 5129/Amd 1:2015
Acoustics - Measurement of sound pressure levels in the interior of aircraft during flight - Amendment 1 (ISO 5129:2001/Amd 1:2013, IDT)

SS-ISO 362-1:2015
Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 1: M and N categories (ISO 362-1:2015, IDT)

SS-ISO 12913-1:2015
Acoustics - Soundscape - Part 1: Definition and conceptual framework (ISO 12913-1:2014, IDT)

SS-ISO 12913-1:2015
Acoustics - Soundscape - Part 1: Definition and conceptual framework (ISO 12913-1:2014, IDT)

SS-ISO 1999:2014
Acoustics - Estimation of noise-induced hearing loss (ISO 1999:2013, IDT)

SIS-ISO/TS 13475-2:2014
Acoustics - Stationary audible warning devices used outdoors - Part 2: Precision methods for determination of sound emission quantities (ISO/TS 13475-2:2000, IDT)

SS-EN ISO 11200:2014
Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014)

SS-EN ISO 1680:2014
Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines (ISO 1680:2013)

SS-ISO 20906:2011/Amd 1:2013
Acoustics — Unattended monitoring of aircraft sound in the vicinity of airports — Amendment 1 (ISO 20906:2009/Amd 1:2013, IDT)

SS-EN ISO 3745:2012
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745:2012)

SS-ISO 362-2:2011
Measurement of noise emitted by accelerating road vehicles - Engineering method - Part 2: L category (ISO 362-2:2009, IDT)

SS-ISO 10302-2:2011
Acoustics - Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices - Part 2: Structure-borne vibration measurements (ISO 10302-2:2011, IDT)

SS-ISO 20906:2011
Acoustics - Unattended monitoring of aircraft sound in the vicinity of airports (ISO 20906:2009, IDT)

SS-ISO 13474:2011
Acoustics - Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment (ISO 13474:2009, IDT)

SS-EN ISO 3746:2010
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)

SS-EN ISO 3747:2010
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010)

SS-EN ISO 8253-1:2010
Acoustics - Audiometric test methods - Part 1: Pure-tone air and bone conduction audiometry (ISO 8253-1:2010)

SS-EN ISO 3743-1:2010
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010)

SS-EN ISO 3741:2010
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010)

SS-EN ISO 3744:2010
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)

SS-EN ISO 11202:2010
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)

SS-EN ISO 11201:2010
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)

SS-EN ISO 11204:2010
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)

SS-EN ISO 8253-2:2010
Acoustics - Audiometric test methods - Part 2: Sound field audiometry with pure-tone and narrow-band test signals (ISO 8253-2:2009)

SS-EN ISO 17201-5:2010
Acoustics - Noise from shooting ranges - Part 5: Noise management (ISO 17201-5:2010)

SS-EN ISO 11688-1:2009
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)

SS-EN ISO 11546-2:2009
Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)

SS-EN ISO 11546-1:2009
Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995)

SS-EN ISO 12001:2009
Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996)

SS-EN ISO 11957:2009
Acoustics - Determination of sound insulation performance of cabins - Laboratory and in situ measurements (ISO 11957:1996)

SS-EN ISO 11203:2009
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)

SS-EN ISO 11205:2009
Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003)

SS-EN ISO 7235:2009
Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003)

SS-EN ISO 5136:2009
Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003)

SS-EN ISO 9614-1:2009
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993)

SS-EN ISO 9614-3:2009
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002)

SS-EN ISO 4871:2009
Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)

SS-EN ISO 389-9:2009
Acoustics - Reference zero for the calibration of audiometric equipment - Part 9: Preferred test conditions for the determination of reference hearing threshold levels (ISO 389-9:2009)

SIS-ISO/TS 7849-2:2009
Acoustics - Determination of airborne sound power levels emitted by machinery using vibration measurement - Part 2: Engineering method including determination of the adequate radiation factor (ISO/TS 7849-2:2009, IDT)

SIS-ISO/TS 7849-1:2009
Acoustics - Determination of airborne sound power levels emitted by machinery using vibration measurement - Part 1: Survey method using a fixed radiation factor (ISO/TS 7849-1:2009, IDT)

SS-EN ISO 11689/AC:2009
Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment (ISO 11689:1996/Cor 1:2007)

SS-EN ISO 10846-5:2009
Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion (ISO 10846-5:2008)

SS-EN ISO 10846-2:2008
Acoustics and vibration - Laboratory measurement of vibroacoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-2:2008)

SS-EN ISO 10846-1:2008
Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1: Principles and guidelines (ISO 10846-1:2008)

SIS-ISO/TR 25417:2008
Acoustics - Definitions of basic quantities and terms

SS-EN ISO 4869-3:2007
Acoustics - Hearing protectors - Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture (ISO 4869-3:2007)

SS-EN ISO 389-6:2007
Acoustics - Reference zero for the calibration of audiometric equipment - Part 6: Reference hearing threshold levels for test signals of short duration (ISO 389-6:2007)

SS-EN ISO 389-5:2006
Acoustics - Reference zero for the calibration of audiometric equipment - Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz (ISO 389-5:2006)

SS-ISO 9613-2:2006
Acoustics - Attenuation of sound during propagation outdoors - Part 2: General method of calculation (ISO 9613-2:1996, IDT)

SS-ISO 9611:2006
Acoustics - Characterization of sources of structure-borne sound with respect to sound radiation from connected structures - Measurement of velocity at the contact points of machinery when resiliently mounted (ISO 9611:1996, IDT)

SS-EN ISO 389-8:2005
Acoustics - Reference zero for the calibration of audiometric equipment - Part 8: Reference equivalent threshold sound pressure levels for pure tones and circumaural earphones (ISO 389-8:2004)

SS-ISO 226:2004
Acoustics - Normal equal-loudness-level contours (ISO 226:2003, IDT)

SS-ISO 15665:2004
Acoustics - Acoustic insulation for pipes, valves and flanges (ISO 15665:2003 + Cor 1:2004, IDT)

SS-EN ISO 10846-4
Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion (ISO 10846-4:2003)

SS-ISO 13473-2
Characterization of pavement texture by use of surface profiles - Part 2: Terminology and basic requirements related to pavement texture profile analysis

SS-ISO 13473-3
Characterization of pavement texture by use of surface profiles - Part 3: Specification and classification of profilometers

SS-EN ISO 10846-3
Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-3:2002)

SS-EN ISO 14257:2005
Acoustics - Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance (ISO 14257:2001)

SS-ISO 5129
Acoustics - Measurement of sound pressure levels in the interior of aircraft during flight

SS-ISO 15664
Acoustics - Noise control design procedures for open plant

SS-ISO 13475-1
Acoustics - Stationary audible warning devices used outdoors - Part 1: Field Measurements for determination of sound emission quantities

SS-EN ISO 11690-3
Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 3: Sound propagation and noise prediction in workrooms (ISO/TR 11690-3:1997)

SS-EN ISO 389-4
Acoustics - Reference zero for the calibration of audiometric equipment - Part 4: Reference levels for narrow-band masking noise (ISO 389-4:1994)

SS-EN ISO 14163
Acoustics - Guidelines for noise control by silencers (ISO 14163:1998)

SS-ISO 11819-1
Acoustics - Measurement of the influence of road surfaces on traffic noice - Part 1: Statistical Pass-By method

SS-ISO 10843
Acoustics - Methods for the description and physical measurement of single impulses or series of impulses

SS-EN ISO 266
Acoustics - Preferred frequencies (ISO 266:1997)

SS-EN ISO 11821
Acoustics - Measurement of the in situ sound attenuation of a removable screen (ISO 11821:1997)

SS-EN ISO 11689
Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment (ISO 11689:1996)

SS-EN ISO 11820
Acoustics - Measurements on silencers in situ (ISO 11820:1996)

SS-EN ISO 9614-2
Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning (ISO 9614-2:1996)

SS-ISO 8297
Acoustics - Determination of sound power levels of multisource industrial plants f"r evaluation of sound pressure leveles in the invironmental - Engineering method

SS-ISO 9613-1
Acoustics - Attenuation of sound during propagation outdoors - Part 1: Calculation of the absorption of sound by the atmhosphere

SS-ISO 7196
Acoustics - Frequency-weighting characteristics for infrasound measurements

SS-ISO 7574-4
Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 4: Methods for stated values for batches of machines

SS-ISO 7574-1
Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 1: General considerations and definitions

SS-ISO 7574-3
Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 3: Simple (transition) methods for stated values for batches of machines

SS-ISO 7574-2
Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 2: Methods for stated values for individual machines

SS-ISO 532
Acoustics - Method for calculating loudness level

SS-ISO 16
Acoustics - Standard tuning frequency (Standard musical pitch)

SS-ISO 5128
Acoustics - Measurement of noise inside motor vehicles

Show more Show less

Participants 11 companies and organizations

3M Svenska AB, SOLNA

AFRY Infrastructure AB, Göteborg

Akustikverkstan Konsult AB, Lidköping

Linköpings tekniska högskola Inst för medicinsk teknik IMT, Linköping

Mälarsjukhuset Landstinget Sörmland, Eskilstuna

RISE Research Institutes of Sweden AB, Borås

Scania CV AB, Södertälje

Statens Väg- & Transportforskningsinstitut, Lund

Volvo Car Corporation, Göteborg

Volvo Lastvagnar AB, Göteborg

VTI, Statens väg- och transportforskningsinstitut, Linköping

Show more Show less

International participation 24 international committees

ISO/TC 43, Acoustics

ISO/TC 43/AHG 1, Review of the definitions of impulsive sound

ISO/TC 43/SC 1, Noise

ISO/TC 43/SC 1/WG 17, Methods of measurement of sound attenuation of hearing protectors

ISO/TC 43/SC 1/WG 23, Measurement of noise from information technology, business and telecommunications equipment

ISO/TC 43/SC 1/WG 27, Joint ISO/TC 43/SC 1 - ISO/TC 22 WG: Effect of temperature on tyre/road noise testing

ISO/TC 43/SC 1/WG 28, Basic machinery noise emission standards

ISO/TC 43/SC 1/WG 33, Measuring method for comparing traffic noise on different road surfaces

ISO/TC 43/SC 1/WG 39, Characterization of pavement texture using surface profiles

ISO/TC 43/SC 1/WG 42, Joint ISO/TC 43/SC 1 - ISO/TC 22 WG: Measurement of noise emission (external) from road vehicles

ISO/TC 43/SC 1/WG 45, Description and measurement of environmental noise (Revision of ISO 1996-series)

ISO/TC 43/SC 1/WG 51, Noise from shooting ranges

ISO/TC 43/SC 1/WG 54, Perceptual assessment of soundscape quality

ISO/TC 43/SC 1/WG 57, Joint ISO/TC 43/SC 1 - ISO/TC 22 WG: In-situ measurements of blocked forces

ISO/TC 43/SC 1/WG 58, Sound power levels of air-terminal devices

ISO/TC 43/SC 1/WG 61, Revision of ISO 9613-2 - Attenuation of sound during propagation outdoors

ISO/TC 43/SC 1/WG 64, Revision of ISO 7574 (all parts) — Statistical methods for determining and verifying stated noise emission values of machinery and equipment

ISO/TC 43/SC 1/WG 65, Acoustic quality of open office spaces

ISO/TC 43/SC 1/WG 66, Revision of ISO 15665 Acoustic insulation of pipes, valves and flanges

ISO/TC 43/SC 3, Underwater acoustics

ISO/TC 43/WG 1, Threshold of hearing

ISO/TC 43/WG 10, Hearing aid fitting management

ISO/TC 43/WG 9, Method for calculating loudness level

CEN/TC 211, Acoustics

Show more Show less

Financing

Arbetet styrs och finansieras av de organisationer som deltar i kommittén. Projektavgiften beror på arbetsform och omfattning, samt antal deltagare.

Subjects

Environment, health protection, safety (13) Noise with respect to human beings (13.140) Acoustics (14.020) Metrology and measurement, physical phenomena (17) Acoustics and acoustic measurements (17.140) General (17.140.01) Noise emitted by machines and equipment (17.140.20) Noise emitted by means of transport (17.140.30)

För dig som är kommittédeltagare i TK 110

Gå till deltagarportalen >

För ett effektivt och meningsfullt deltagande i våra tekniska kommittéer erbjuder vi utbildningar i standardutveckling. För deltagare i tekniska kommittér är grundkursen kostnadsfri.

Se utbildningar >

Här finner du en Akustisk ordlista TK 110 2023-04-17 som innehåller termer använda i standarder för bullermätning över kommitténs standarder.

Contact

If you have questions or want to know more about the SIS standardization activities? Please contact us.

Mia Lindberg
Project manager
mia.lindberg@sis.se

Benitha Pilley
Project coordinator
benitha.pilley@sis.se

Krister Larsson
Chairman
AFRY Infrastructure AB